Cổng Dò Kim Loại CEIA SMD600Plus – Italia

Gate structure

• Useful transit area (W x H): 720 mm x 2050 mm (standard configuration); 820 mm x 2050 mm (wider passage width)
• Antivandalic and antitampering IP66 control unit
• Embedded high precision transit counters (2-beam photocells)
• Antitampering ON/OFF switch
• State-of-the-art, robust and washable panels
• Protected against aging, weather and wear

Operational features

• High discrimination and transit flow rates five or more times greater than other metal detection systems
• Quick reset time as short as 0.2 seconds for high throughput rate
• Very high detection speed (up to 15 m/sec.)
• Built-in operational functional verification (OFV)
• One-touch key reading of inbound, outbound and Security Level Data

Quality

• Continuous self diagnostic system
• Proven reliability
• No periodic re-calibration required
• Fully digital design

Alarm signalling

• Multi-zone display bar for “height on person” localization
• Dual side 20 x 2 localization zones
• Specific shoe alarm color indication
• 4 light bars with selectable entry/exit and pacing indication
• Green and red metering signals proportional to the mass of the detected target
• 10 selectable continuous and pulsed tone plus 34 special tones
• 10 selectable sound intensities ranging from 0 to 90 dbA at 1m
• Random alarm capability with independent counters, alarm tone and alam volume
• Met-Identity technology (separate Ferrous and Non-Ferrous alarm signaling)

Type of signalling

• Fixed or proportional to the mass in transit - visible from 6m under lighting of 4000lux
• 20 x4 distinct zones (20x2 entry side and 20x2 exit side)

Programming

• Up to 50 built-in Security Programs
• Remote via Infrared Remote Control Unit, BT or Ethernet 10/100 base T (option) interface
• Security level: International Standard (IS) command / Chip card
• Local by Control Unit alphanumeric display and keyboard
• Automatic Channel Search (CS)
• Automatic Floor Gain Adjustment (FGA) and Automatic Technical Functional Verification (TFV)
• Automatic Vibration Compensation (AVS, EVA) and Automatic Environmental Noise Compensation (ENA)

Environmental data

• Powered by safe low voltage DC through external switching power supply adapter
• Power Supply : 100…277V~ ±10%, 47…63Hz, 40 VA typical consumption
• Operating temperature: -20°C to +65°C (-37°C to +70°C upon request)
• Storage temperature: -37°C to +70°C
• Relative humidity: 0 to 95% (without condensation)

Installation data

• Automatic synchronisation between two or more metal detectors with distance of down to 5 cm without the use of external cables
• One Touch Automatic Self Installation (OTS)

Certification and compliance

• Fully compliant with the NIJ-0601.02 Standard requirements
• Complies with the applicable Standards for Law Enforcement and Correctional Facilities
• Compliant with and certified to the strictest Standards for Airports Security
• Compliant with applicable International Standards for electrical safety and EMC
• Compliant with the applicable electromagnetic Standards on Human Exposure and Pacemaker Safety
• Harmless to magnetic media (CD, tapes, etc.)

Cổng Dò Kim Loại CEIA là thiết bị công nghệ của thương hiệu CEIA, là một công ty chuyên tập trung về thiết kế và sản xuất hệ thống kiểm tra điện tử. Các sản phẩm của CEIA được ưu ái sử dụng tại các cơ quan nhà nước và nhiều doanh nghiệp tư nhân hàng đầu đã khẳng định uy tín và vị trí dẫn đầu trên thị trường về giải pháp bảo mật.

Với hơn 50 kinh nghiệm thiết kế và sản xuất máy dò kim loại, CEIA đã phát triển ra các sản phẩm có độ nhạy cao, phát hiện các vật thể kim loại nhỏ, chẳng hạn như lưỡi dao cạo…